If you’re like me, you can’t stand to wear shoes that are scuffed or creased. So what do you do when your favorite shoes get a crease?
You buy new ones, of course! I used to think there was nothing I could do about it until my sister showed me this trick.
All she did was take some paper towels and wet them down with water, then rub the shoe on it while pressing hard.
This removed all the dirt and grime accumulated in the creases while making her boots look brand new again!
Now that’s one nifty trick for getting rid of those pesky little creases in your shoes.
Easy ways to get creases out of Shoes
Shoes are expensive, and when you take them off after a long day in the office or at an event, they’re left with unsightly creases that can ruin their appearance.
While it may be tempting to buy a new pair when your shoes come out looking less than perfect, there are methods you can use to remove these creases yourself.
Also read: How to protect white shoes.
1. How to get creases out of shoes without ironing:
If you have shoes with creases in them, you may be worried about getting creases out of your shoe. It is possible to get rid of the wrinkles without using an iron.
If you’re wondering, “how do I remove creases from my shoes?” then keep reading to find out some easy steps on how to do so.
Steps to remove creases from shoes:
Step 1:
Get a hairdryer or a hot iron and a towel. You want to put the towel over the part of the shoe with the crease in it because you don’t want any steam getting on anything but where you’re trying to get rid of the crease.
Step 2:
Turn the hairdryer on high heat, or set it to medium heat if you’re using a hot iron.
You don’t want it to be too hot because you could burn the shoe, but if it’s not hot enough, then it won’t take out the crease at all.
Step 3:
Hold your towel-covered hand very close to the crease.
Make sure to keep to one side of the crease and hold the hairdryer about a foot in front of it so that there is a strong airflow going over where your hand is.
Step 4:
Hold for twenty seconds to a minute, then switch hands and do the same thing on the other side of the crease.
It should start to go away within a few minutes. If not, repeat the process.
Step 5:
Once it’s gone, let your shoes dry, and then put them in your closet to air out for a while before you wear them again.
This will also prevent any more creases from forming or getting worse in your shoes that already have them.
Also read: Make shoes waterproof.
2. How to get creases out of shoes with Leather Oil:
Leather oil is a good solution for getting rid of wrinkles in shoes, but it must be used carefully—experiment on a small area to test how your shoe leather will react before applying the oil everywhere.
The process of getting creases out of shoes with leather oil involves:
- Applying oil to creased areas of shoe leather.
- Letting the oil soak into the leather.
- Gently remove excess fat and buff the shoe to a shine.
Steps to follow:
Step 1:
Wet the creases with water.
Step 2:
Apply leather oil generously but gently. You can always add more later, but excess oil will ruin your shoe! Keep in mind that wet shoes will stretch more than usual, so go easy.
Step 3:
Wipe away excess oil with a clean cloth/cloth/rag until the entire area is soaked with leather oil. Allow the shoe to dry completely before use (overnight is best).
Step 4:
Use the tip of your finger or a soft toothbrush to rub any remaining shiny areas on the leather (where you can’t see the creases).
The area will look darker than other areas because the oil has soaked in, but this will become less noticeable as it dries over time.
Step 5:
Buff to a shine with another soft cloth if desired.
Step 6:
Repeat weekly for best results. If you do not have time to do this, you can buy crease-removing shoe cream instead.
If applied carefully, the creases in your shoes will dissolve over time. Leather is porous, so it absorbs liquid quickly but loses liquid easily too.
Therefore, you need to reapply regularly (weekly or bi-monthly) for this to work.
Warning: Leather oil is flammable, so do not use it near an open flame (and be careful when you put it away).
Also read: Best color matching shoes.
3. How to get creases out of shoes with a Heat Gun:
Creases can be formed from daily wear and tear on a pair of shoes and during shoe manufacturing.
Once a crease is noticeable in a couple of shoes, it’s often difficult to get rid of without damaging the material.
Especially if one doesn’t have access to professional equipment. Fortunately, a cheap and easy way to remove creases from the shoes is using only a heat gun.
However, if you cannot get your hands on a heat gun: The best result is achieved if one uses a heat gun (a hairdryer can be used) and spreads it evenly over all parts of the shoe.
The hot air penetrates the leather and makes it softer, therefore more accessible for the user to press out creases.
It is recommended that you do not keep the heat gun in one place for too long because it can damage or melt the shoe’s material.
Steps to Follow:
Step 1:
Start by turning on and heating the heat gun (a hairdryer will work as well). When using a heat gun, make sure to hold it very far from the shoes; about 3 feet away should be fine.
Step 2:
Place the paper towel between the shoes and the heat gun. Make sure to angle it so that none of the heat is directed towards your hands, face, or any part of your body.
Step 3:
Heating up all parts of the shoe should only take about 1 minute.
If you find one spot where there are more creases than others, move the heat gun closer to that area for less than 10 seconds, moving it away every 3-5 seconds.
Step 4:
Continue this process over all parts of the shoe until no creases remain.
Step 5:
The leather should be very hot at this point, so let it rest for about 30 seconds before putting your hands.
Also read: Stop shoes from squeaking
Can you prevent shoe creases from occurring?
You can’t prevent your shoes from creasing, but there are a few things you can do to lessen the chances of them creasing dramatically. These are some of them:
- To preserve the shape of the shoe and the leather tight, use a shoe tree.
- Slip-on your shoes with a shoehorn to avoid damaging the back of the shoe or over-flexing it when putting them on.
- To avoid having any problems like this in the future, make sure that you don’t tie your shoelaces too tight or wear them for too long at once. If they start to hurt after wearing them for a while, take them off and let them sit for an hour or so before putting them back on again.
- Also, keep your shoes clean by regularly brushing off any dirt on the outside of your shoes and inside of your shoes with a toothbrush or something similar. If you don’t want to do it yourself, take your shoes to a cobbler who will clean them.
Also, read Best shoes for dancing.
CONCLUSION:
The leather looks beautiful with a bit of wear and tear, but too many creases can make it look tired and worn out. Deep wrinkles can also cause blisters by rubbing against your feet.
You undoubtedly want to preserve your shoes in good condition if you paid a lot of money.
Furthermore, if you wear dress shoes frequently, keeping them smooth and polished will appear more professional.
Also, read Best shoes for running.